Skateboard wheels are the most important component of your skateboard setup after your skateboard deck. Without quality wheels, you won’t be able to ride as smoothly or as fast. A common problem that skaters face is when their skateboard wheels don’t spin as long or efficiently as they did before. Another question is how long should skateboard wheels spin. We’ll go through some tips and tricks to help make sure your skateboard wheels spin longer than ever!
Just like a skateboard helmet, your skateboard wheels are one of the most important parts of your skateboard. It’s essential to have a tight grip on the road for a smooth ride, and old or worn-out wheels can mess that up. Having problems where your skateboard wheels aren’t spinning well? Don’t worry! We’ll teach you how to make sure those bad boys spin smoothly and long.
If your wheels aren’t spinning correctly, you won’t be able to maximize your potential when it comes to skateboarding tricks and stunts. If you find that your new skateboard wheels aren’t spinning properly or they are too tight, here are some steps you can take to make sure they spin smoother and last longer! Here in the body of this article, we are going to answer your all queries like
- How to lose skateboard wheels?
- How to fix new skateboard wheels that are not spinning well?
- How freely should skateboard wheels spin?
- How to make my skateboard wheels spin longer?
- Why do my skateboard wheels not spin for long?
Do you take care of your skateboard in a quick way? Take your wheels for a free spin. If you know how long skateboard wheels should spin, you’ll know what kind of shape they’re in. And if your wheels are too tight or too loose, it will affect how fast you go and how well you can turn.
Related article: Can We Use A Skateboard Helmet For Snowboarding?
When it comes to your skateboard’s wheels, they should be able to move freely. But how long should the wheels on a skateboard spin? Read on to learn more about it.
How Long Should Skateboard Wheels Spin?
Just to make sure everything is in working order, give your skateboard a test spin. Skateboard wheel spinning time goals should be somewhere between 10 and 30 seconds. Your skateboard’s wheels should be able to rotate freely for at least ten seconds.
- Wheels are tightly set if the spinner stops within 10 seconds.
- If it surpasses the 30-sec limit, it is a little loose.
If this is the case, you’ll need to adjust some options, including
- Cleaning up the wheels and rollers
- To keep the wheels turning smoothly
- Adjusting the tightness of your skateboard’s wheels with a wrench
- Tightening the nuts on each wheel can remedy squeaking or wobbliness.
You, the novice, may not immediately recognize the problem. If nothing seems to be working, keep trying new things.
If you ensure your skateboard rollers are put on right, you’ll be able to move around without any trouble. Also, the right amount of spinning time shows that your wheels are in good shape, which lets you skate safely and smoothly. If you want to move a little faster or stop quickly, the wheels are a key part of making sure everything goes smoothly.
Here are some possible ways to keep your wheels spinning freely for 20 to 30 seconds.
Skateboard wheels that are too tight can be loosened by turning them in a counterclockwise direction.
If it becomes too loose, you may simply do the opposite.
Then, give it a good, long spin with your hand to make sure it’s free to spin in the typical amount of time, and you’ll know if it’s a good fit for your needs.
To avoid damaging the wheel and bearings, washers are used. As such, it is also suggested that the washers be repaired as part of the skateboard’s fine-tuning process. So, use washers to create space between the wheels and the axle to lessen the drag.
Finally, spin the wheels a lot to assess their stability. You can continue as soon as the jiggling has stopped, or is barely noticeable, while they are spinning.
Cleaning Skateboard Bearings:
You only need to put in a short amount of time to clean effectively. Scrubbing the skateboard’s wheels can help prevent the squeaking and bumping from bearings worn down.
This is what you’ll require:
- A rag for cleaning up spills
- Degreaser or oil
- A bowl to hold the bearings while they soak
You can follow the following steps to clean skateboard bearings.
- Skateboard bearings can be cleaned by removing the axle nut. Do this if the bearings are dirty.
- The bearing shields can then be pried off with a razor blade, paperclip, or another similarly thin tool.
- Second, you’ll need to let them soak in the solvent solution for 2 to 5 minutes in a jar.
- Get out the soft towels and wipe the bearings clean.
- Next, dry the bearings with a hair dryer or a lint-free towel.
- At last, you relubricate the bearings to make sure they’re in good shape and ready to go again.
Determining Skateboard Wheels Replacement to make skateboard wheels spin faster:
When the wheels on your skateboard are worn out to the point where they no longer perform their intended functions, it’s usually game over for good. Skateboard wheels must be changed when the following conditions apply:
- If you see cracks in the wheels.
- If they have rust because of constant contact with moisture.
- When hard wheels wear down, you can see pitting and rips developing if you look closely.
- Softer wheels tend to separate or rip more easily, resulting in a faster loss of diameter.
- Additionally, the wheels lose their strength as their diameter shrinks due to friction.
For this reason, when it comes time to replace your wheels, you should look into popular brands. You can get the most out of your skating by picking the right-sized wheels for the surfaces you’ll be traversing.
Commonly used for casual skating, the 72a (52mm) provides a comfortable ride. However, when doing tricks that put stress on your wheels, you should switch to rigid wheels. How tight should skateboard wheels be?
Why are my skateboard wheels slow?
Over-tightened axle nuts are one of the most common causes of a sluggish skateboard. Just how snug must skateboard wheels be? When axle nuts are overly tightened, they press against the bearings and prevent the wheels from turning. This is a common blunder, and it always ends in a somewhat audible squeaking or rubbing sound.
How long should a skateboard wheel spin?
Try to keep the skateboard wheels spinning for ten to thirty seconds. To clarify, your skateboard’s wheels should be able to spin freely for at least 10 seconds. If it stops in under 10 seconds, your wheels are too close together. In case it goes over 30 seconds, it’s sloppy.
How can I make my skateboard bearings spin faster?
You may increase the speed of your skateboard by making the bearings spin faster here are the methods.
Loosen the wheel axle nuts just a little.
Wheels’ contact surfaces should be cleaned.
If the bearings in your skateboard are dirty and make noise, you should clean them.
You can get rid of the size discrepancy by switching the wheels.
Get good bearings.
Do yourself a favour and get some wheels that complement your style.
How do you fix a slow skateboard wheel?
If your bearings have shields, you must take them off. Just use a paper clip to poke them out. The next step is to use acetone, nail paint remover, or rubbing alcohol to wet your compass and map. Clean them thoroughly and spin them dry to remove any lingering dust or dirt. Once the grease and dirt were gone, the bearings could function properly. You should lubricate with something that contains silicone.
WD40 and similar products will dry up your bearings and attract dust and debris. Bones Speed Cream is sold at skate shops, while prolong may be found at auto parts stores. Reinstall the shields, reinstall the bearings, and begin shredding; you won’t need much, and the excess will spin off. Don’t risk your life to impress your friends but do take advantage of your speedier skating.
Why does my skateboard lose speed so fast?
A layer of dirt and dust increases friction, slowing down the skateboard. One of the major reasons might be too tight axle nuts, inadequate size of skateboard wheels, or low-quality skateboards. All you need to do is clean your wheels, bearing and check the axle nut tightness and adjust it if needed.
Sometimes it is all about the surface area of the skating place because too hard and small wheels are not suitable for rough roads, soft and big wheels are more suitable for rough roads as they can absorb shocks and bumps you encounter while riding. Small hard wheels are suitable for concrete roads.
Wheels have an impact on your speed because of the role they play in a skater’s overall speed and flexibility.
How long should skateboard wheels spin? Spin, observe, and determine. Keep in mind that the typical amount of time spent spinning is between 20 and 30 seconds.
If the wheels of your skateboard don’t reach those markers, there is something else wrong with your skateboard. Therefore, if you want to get the most out of your skateboard and reach its full potential, listen to our helpful tips on how you should maintain your skateboard wheels.
I hope you got all your answers and solutions for why your skateboard wheels are stiff and what restricts them to spin your skateboard wheels spin faster.
If you think your friends would enjoy reading this post as much as you do, don’t hesitate to forward it to them!
Duke Edward, a 23-year-old professional skateboarder and content writer, boasts extensive experience in the skateboarding industry. His expertise stems from years of practice and passion for both skateboarding and skiing. As an accomplished athlete, Duke delivers valuable insights and reliable information on skateboarding equipment and techniques.