Skate Techniques

How To Do A 360 Flip?

Rodney Mullen, a skateboarder who was active in the 1980s, is credited with ushering in the era of flip tricks, which not only changed the sport of skating but also opened the way for the likes of skateboarding greats Tony Hawk and Bob Burnquist.

The tre flip (also known as 360 flip) is a little more sophisticated trick than the basic skateboarding tricks which many skateboarders learn after they have mastered the fundamental moves.

Rodney Mullen is credited with inventing the skating trick known as the tre flip, which is sometimes referred to as the 360 kickflips or 360 flip.

A kickflip and a backside 360 pop shove-it are combined into one trick known as a tre flip. If the trick is performed correctly, the board will spin through all 360 degrees while it is in the air and will also flip through all 360 ° across its longitudinal axis.

360 flip is a combination of two tricks into one, the 360 flip calls for perfect timing as well as balanced weight distribution.

A 360 flip occurs when the board performs both a shuvit and a kickflip in rapid succession. The precise use of your back foot to turn the deck around is essential to successfully perform this trick.

The 360 Flip, or Treflip, is an intermediate-level maneuver. The rider’s body remains stationary while the board rotates through a full 360 degrees during a 360 Flip. It’s a cross between a 360 Pop Shove-It and a Kickflip in skateboarding lingo. The crowd goes wild whenever they see this skating classic.

instructions on How To Do A 360 Flip?

1. When standing on your board, your rear foot should be positioned so that the toes are hanging off the edge. Due to the importance of the scoop using your back foot, this is going to be a huge aid.

2. The position of the front foot should always be similar to that of a kickflip, but the foot should be rotated and moved slightly further back. This allows you to perform a karate kick with your front foot while simultaneously jumping and scooping the board with your rear foot. The reason for this is so that you may accomplish both at the same time.

3. Kick out as you’re doing a Kickflip, but with greater force, while simultaneously popping and scooping the board beyond you by your rear foot. If you do this while simultaneously spinning the board, it should be able to complete a full revolution of 360 degrees.

4. It is essential to rehearse the timing of the scoop and flick as well as the amount of force that is required to perform either action in order to achieve the desired flips and spins with the board.

5. Raise your legs as high as you can while the board is turning, and then relax and allow the board to spin completely.

To sum up:

The board completes a 360-degree shuvit and kickflip when it performs a 360 flip. The precise use of your back foot to turn the deck around is essential to successfully perform this trick.

1. Before you push off, place your front foot as though you were about to do a kickflip. It should be angled at 45 degrees and about 2 to 3 centimeters nearer to the middle of the board than the bolts. Put the back of your foot on the tail, with the toe of that foot closer to the edge.

2. Your front leg leads out into a kickflip, and your back leg snaps like it would in a pop shuvit, but with a little bit more force. At this moment, you should take a step forward, then twist the board so that it rotates.

3. Place your rear foot down and grab the board with your front foot, then release your front foot. Maintain your concentration; in order to prevent yourself from going off the board, you have to catch it with your entire foot.

Related article: