Learn Tricks

How To Do An OLLIE In 5 Minutes | 5 Tips For Beginner

A hallmark in professional skating is the ollie, a trick that enhances a skater’s airtime and hence is essential in competition. Learn the ollie if you’re a beginner skateboarder who wants to go to the next level.

The ollie is a skating trick in which the rider launches their board into the air by snapping the tail off of a flat surface.

Every street trick, and even most ramp tricks, start with an ollie. In street skateboarding, airtime is essential for many tricks, including hopping over curbs, grinding on rails and benches, doing board flips and rotations, clearing stairs on a jump, and more.

The ollie is essential for generating as much airtime as possible in vertical skating, allowing you to accomplish more difficult aerial maneuvers.

As there is a famous quote about Ollie:

“Ollie is the mother of all other skating techniques.

How To Do An OLLIE In 5 Steps?

One of the earliest skills you should acquire on the skateboard is the ollie, a type of leap. The ollie serves as the foundation for a wide variety of skateboarding tricks for beginners and is characterized by precise timing and placement of the feet. Follow the tips below to perfect your ollie:

Step 1: Adjusting your back foot:


To begin, you will need to place your leading foot on the board such that it is a little in front of the center of the board. You should position your back foot so that it is completely on the edge of the tail.

Step 2: Keep your knees bent:

After that, squat down by bending your knees until you are in a crouching position and ready to launch yourself upward with your board.

Step 3: Apply pressure sharply with your heel:

Your board will begin to go vertical once it makes contact with the ground as a result of your forceful snap down on the tail with your back foot. After you have snapped your board, flex your back leg to allow your board to rise and your rear wheels to lift off the ground.

Step 4: Slide your front foot forward:

Move your front foot forward until it catches the board, which will help you level it out and bring the back end of the board up to your back foot.

Step 5: Straighten your legs:

After keeping the friction between your feet and the board by bending both of your legs, straightening your legs will allow you to land an ollie by bringing the board back down to the ground.

Pop Shove It:

The Pop Shove-it is a simple maneuver in which the skater’s board spins 180 ° around the leading edge while their body remains stationary.


Pop Shove-Its can be performed on their own or in combo with other flip tricks like the grind and the manual. Skaters should learn the pop shove-it because it looks great anywhere, but especially on hips and stair sets. This is your first step into the exciting world of flips.

Let me show you how the Pop Shove-It operates.

  1. The pop-shove-it takeoff posture is quite close to an ollie’s. Do an ollie and plant both feet firmly on the board.
  2. While popping off, you rotate the tail of the board by pushing it behind you using the heel of your foot to cause it to rotate. This causes the tail of the board to drag across the ground ever-so-slightly.
  3. When it comes to this technique, the most essential thing is to get the time and the force just right such that the board spins precisely 180 degrees.
  4. When you have determined the appropriate dosage, the next step is to work on catching the board after it has finished its spin, which means catching it while both of your feet are in the air.
  5. When you land, you should try to land on your feet on the trucks so that the power of your landing is distributed evenly over the board.


A nose ollie, often known as a “nollie,” is a type of ollie in which the skater uses his or her front foot to clamp down on the tip of the board, instead of the tail, to pop the front wheels. The skater launches the board into the air and grabs it with their feet before settling down firmly on the ground.

Difference between Nollie and Ollie:

When you perform a standard ollie, you bring your foot down on the tail of the skateboard and pop the nose of your board. When you perform a nollie, you bring your foot down on the tip of the skateboard and pop the rear wheels.


Skaters would do well to master the nollie. These are the measures to take in order to master the nollie:

  1. put your leading foot in the correct spot. Keep your weight centered on the nose of the skateboard, right where your front foot is.
  2. You should put your back foot in this position. You should move your rear foot to the center of your skateboard. The higher you can nollie, but the less stable you’ll be if you place your back foot closer to the front of the board.
  3. Having a good middle ground. You’ll need to be able to maintain this balance on your skateboard if you want to pull off and land this trick.
  4. Bend. Get low and ready to launch yourself upward by bending your knees.
  5. And last, number five: blow your nose. You may pop the back of the board up by pressing down on the nose at an angle with your front foot and moving your back foot to the tail.
  6. Grab the board and go! Keep your balance when you revert to your starting stance; this will allow you to land directly on the ground.

Switch Ollie:

Switch Ollie is not something else than just a Nollie with a switch stance.

In a regular stance, an ollie is done in the goofy position; in switch, the position is the opposite. An ollie performed while in a fakie stance, in which the rider’s feet are placed on the tip of the board rather than the tail, is known as a fakie ollie.

  1. Press the appropriate button. One leg should be placed on the tail. Put your front leg somewhere close to the center of the board, preferably towards the bolts.
  2. Crouch down and start bending your knees. Snap the tail with your back leg while slightly retracting your front leg and leading out the nose with your front foot.
  3. Land on your knees with a push toward your chest. You should aim to land on both feet at once, as near to the trucks as you can get.
  4. continue riding. remaining in the switch.

Read more: