FAQs

How To Make Your Skateboard Quieter In 5 Simple Steps

Noise from the decks, wheels, and squeaky trucks. It’s a common occurrence, and it’s a major source of distraction. However, with just a few simple adjustments, you can reduce the noise your skateboard makes. Changing the bearings, readjusting the trucks, or purchasing a new deck are all viable options.

Making a quieter skateboard may be the only thing you need to do to protect your hearing, even if it may sound like a lot of extra work now. Lubricating the bearings is the most effective method for eliminating the noise. Wheels can be lubricated using WD-40, oil, or a spray lubricant. 

There are a few causes for the sound made by your skateboard or longboard.

  • Your base plate has loose screws.
  • Low-quality bushings.
  • The pivot cup has worn out.
  • Rusted wheels and tires.
  • Mobile washers.
  • Problems with the lift pads.
  • Problems with wheel hardness or flat places.

Here is the solution to make your skateboard quiteter. 

  1. Put in high-quality bearings to replace the ones that are worn out.
  2. Add soft risers to your setup to reduce noise and stop movements.
  3. Use softer wheels, which are made to reduce noise and absorb shocks.
  4. Use an oil made for skateboards to grease your trucks to reduce friction and noise.
  5. Keep your skateboard in good shape by cleaning and checking its parts often to avoid wear and damage that can make noise.

How To Make Your Skateboard Quieter in 5 Simple Steps

Certainly! Here is a five-step guide that will help you make your skateboard quieter and is optimized for search engines.

Step 1: Replace Your Bearings.

Old, noisy bearings on a skateboard are a regular problem. Dirty, rusted, and otherwise damaged bearings might make a racket after some time has passed. Consider purchasing brand new, high-quality bearings as a possible solution to this problem. Skateboard-specific bearings with a high ABEC rating are your best bet for precision and a smooth ride.

Step 2: Add Soft Risers.

Soft risers are another great technique to muffle the sound of your skateboard. Wheel biting can be avoided and shock can be absorbed by placing riser pads between your skateboard’s deck and trucks. Riding on rough or uneven surfaces can increase vibration and noise, but soft risers constructed of rubber or other flexible materials can assist.

Step 3: Use Soft Wheels.

Skateboards can also make a lot of noise, especially on bumpy surface, due to the hard wheels. You could want to upgrade to softer wheels that can better absorb impact and dampen vibrations. For cruising and carving, softer wheels are preferable because to their increased grip and traction.

Step 4: Lubricate Your Trucks.

Skateboard noise can also be caused by the metal parts of your trucks rubbing against one another. A modest amount of skateboard-specific lubrication applied to the pivot cups and kingpins can greatly reduce this noise. The less friction there is between the moving parts, the quieter the ride will be.

Step 5: Maintain Your Skateboard.

Finally, frequent maintenance is key to preserving the silence and efficiency of your skateboard. Maintain a regular cleaning and inspection schedule for your bearings, trucks, and wheels. In order to keep your bike quiet and performing at its best, it is important to replace any worn or damaged parts as soon as possible.

If you follow these instructions, you can make your skateboard significantly quieter and have a more pleasant riding experience.

What to do if your bearings are noisy?

If your bearings are making noise, you can identify the offending bearing by putting slight pressure to it. If the bearing makes no noise when pressure is applied, the issue is most likely with the inner race. 

The outer race is likely to blame if your bearings create noise when you apply force. Your bearings should be easily replaceable if they are in the inner race. Use a bearing puller if you’re having trouble locating a bearing in the inner race.

Read more about New Skateboard Bearings Are Slow.

Use a bearing press if you are having trouble locating a bearing in the outer race. Still having issues? The noise is coming from your bearings, and the answer is to get new ones.

What to do if your truck is noisy?

If your truck is making annoying squeaking noises, you should get it fixed right away. But how exactly should one go about doing so? A beginner skateboarder who values silence above all else should take care to prevent any harm to the vehicle. Duct tape is the best tool for the job. 

Protect your board’s bearings and keep them in place with some duct tape. A piece of tape can be wrapped around the bearing and then around the vehicle. It will secure the bearing and stop the truck from shifting. Just make sure the duct tape doesn’t get all on the bearing.

FAQs:

Are soft skateboard wheels quieter?

Skateboards with hard wheels make more noise than those with soft wheels. More traction and grip can be achieved with harder wheels, making for a more comfortable ride. On the other hand, soft wheels don’t offer quite as much traction, so they can be a little trickier to ride.

Does skateboard squeak go away?

You may quiet down your skateboard by applying lubrication to the trucks and wheels, like WD-40 or bearing lube.

Coconut oil, jojoba oil, and even olive oil are potential alternatives to petroleum-based lubricants. These can be an effective and environmentally friendly way to lessen background noise without compromising the integrity of your circuitry.

Choose your lubricant for your board with caution; a small amount goes a long way toward eliminating that annoying squeak.

What to do if you have a noisy deck?

If you skate on a deck that makes a lot of noise, you might want to try using a noise decal on it, but this isn’t always an option. It is necessary to remove a decal twice a year, in the spring and the fall, if you are going to utilize one.

Conclusion : 

Thanks for reading our post about reducing the noise level of your skateboard. Making your skateboard quieter can be a hassle, but with the advice in this piece, you can do it in no time at all.

Keeping these points in mind can help you crack open your skateboard in no time! Please get in touch with us if you have any questions. Your attention is appreciated. We hope to hear from you soon!

Read more: