Skateboard noise may seem inconsequential, but it can indicate serious problems. If your board is making an annoying squeaking sound when you ride, you should probably investigate the source of the noise.
If the squeak is increasingly louder and more regular, it could be an indication of a problem with the bearings or another part of the skateboard. This article will explain Is It Bad If My Skateboard Squeaks and what you can do about it.
There may be a problem with your skateboard if it makes squeaking noises. It might not be terrible, but you should look into it to make sure your skateboard is safe. Dirty or worn bearings are a common source of noise.
Rolling smoothly is ensured by bearings, which are tiny metal rings housed within the wheels. They can start to squeak if they get dusty or worn. Bearing cleanser or replacement, depending on how worn the bearings are, are two possible solutions.
Squeaking might also be brought on by loose screws or nuts. Check to see that your skateboard has no loose screws or nuts. Last but not least, if your skateboard deck is creaking, it may be warping or delaminating. Skateboard stability is compromised and you risk injury if you fail to look for damage to your deck.
Is It Bad If My Skateboard Squeaks?
Skateboarding is a great hobby as it enables people to express themselves creatively and also improves their overall health and well-being. However, it’s important to have a good understanding of whether your skateboard is operating correctly and safely.
If you notice that your skateboard is making an unusually high volume of squeaky noises, it could be an indication that the bearings or wheels need to be adjusted.
Squeaking may signal an imbalance created by one wheel spinning slightly faster than the other, so it’s crucial to take measures to address the issue, such as applying a light coating of penetrating oil to the squeaky parts. To continue riding securely and happily, it’s essential to take steps to fix the problem.
Why Skateboard Squeaking is a Common Concern Among Skaters?
Squeaking noises coming from skateboards are common and can be unsettling for riders. There are a number of noise-making components on a skateboard. The noise is typically caused by the rubbing together of worn or poorly maintained components.
Skaters have a common problem with their skateboards squeaking, and in this article we’ll investigate why that is and what can be done about it.
Read more about how to make your Skateboard Quieter in 5 simple steps.
A lack of maintenance:
Lack of maintenance is the most common cause of squeaky skateboards. Maintenance on a skateboard consists of the usual suspects: tightening the bolts, oiling the bearings, and wiping down the deck. Dirt and debris buildup or damaged parts might cause the board to make noise if it is not maintained regularly.
Worn Out Bearings:
Skateboard performance is greatly affected by the bearings. They lessen the resistance between the wheels and the axle, making for a more comfortable ride. Constant use can eventually wear down the bearings, resulting in a squeaking noise. The bearings’ useful life can be lengthened through routine cleaning and lubrication.
Read more about why Skateboard Bearings Are Slow?
Skateboards’ hardware, such their nuts and bolts, can become loose and squeak after some use. Loose hardware might cause more severe problems, such wheel wobbling, which can be risky when skating. Skaters should check their hardware frequently and tighten any slack.
Worn Out Deck:
Squeaking sounds can also be produced by a worn out deck. Skateboard decks can deteriorate from general use, weather, or collisions with obstructions. A worn deck not only reduces the board’s responsiveness, but it also poses a safety risk. Skaters should check the condition of their deck on a regular basis and get a new one when necessary.
Skateboards can make squeaky noises when the humidity is high. The metal in skateboard bearings can rust or corrode in damp environments. Skating with this problem can cause a squeaky noise. Skaters should either avoid skating in damp environments or frequently clean and oil their bearings.
Don’t Ignore Your Skateboard’s Squeaking, Here’s What You Need to Know:
Skaters must listen to their boards. Squeaking could suggest a problem that has to be treated before it becomes worse.
Safety Concerns: A squeaky skateboard may be unsafe. Loose hardware, old bearings, or a damaged deck can make the board unstable and dangerous. To protect skaters and others, fix squeaks immediately.
Performance Issues: A skateboard that squeaks might also affect performance. Damaged bearings or decks can slow, balance, and manipulate the board. Skaters should fix squeaks immediately to maximize board performance.
Addressing the Issue: Finding the source of a squeaking skateboard is the first step. Skaters should check for loose hardware, worn bearings, and deck damage. Skaters can remedy the problem after identifying it:
Tighten loose hardware with a skateboard tool:
Skaters can clean and lube their bearings with a bearing cleaning kit.
Skaters should replace worn bearings and decks for better performance and safety.
Skateboard squeaks can be avoided with regular maintenance. Skaters should clean their boards, check for loose hardware, and check the bearings and deck for wear. Maintenance extends the board’s lifespan, prevents accidents, and optimizes performance.
Read more How Long Do Skateboard Trucks Last? What You Need to Know.
How to Keep Your Board Running Smoothly?
Riding down the street with a loud percussive shriek is the worst. However, there are numerous ways to eliminate this sound.
Lubricating and tightening can make your skateboard silent again.
Tighten the trucks: Loose trucks may lead to squeaking. To address this issue, loosen the truck hardware, and then retighten it with a wrench or Allen tool. Make sure to only tighten the screws enough to prevent wobbling or squeaking during your ride.
Lubricate the bearings: In order to avoid bearing squeaks, it is important to not ride in damp conditions without proper lubrication for extended periods of time as this may result in dry bearings.
To fix this issue, the bearings should be removed from the skateboard wheels and mild oil, such as WD-40, should be applied to all of the moving components prior to reinserting them onto the wheels.
Once the bearings have been reinserted, they should be tightened using a wrench or an Allen tool. This method is likely to reduce bearing squeaks.
Check for loose hardware: In the event that the hardware components of a skateboard, such as bushings, nuts, and bolts, have recently undergone replacement, it is possible that they may have become loose due to either wear and tear or insufficient tightening.
Before reassembling everything using a spanner or Allen tool, carefully examine each part for any signs of damage or wear, and tighten any components that require it.
Clean out dirt OR debris buildup: Dirt and debris can cause your skateboard to emit creaking or squeaking noises, especially in wet weather conditions.
To address this issue, it’s recommended to periodically disassemble your trucks from the deck and clean out any accumulated dirt or debris using a rag or brush.
After cleaning, reassemble the trucks in their appropriate position on the deck and securely fasten them using a wrench or Allen tool.
Grease up old bushings: In the realm of regular skating, the bushings have a proclivity to experience wear and tear, which leads to the emission of cacophonous squeaks as they rub against each other during the execution of turns and maneuvers on the board’s surface.
In order to mitigate this irksome occurrence, it is recommended to apply oil directly onto the top surfaces of the bushings using a cotton swab until they are completely saturated. Following this, it is imperative to reassemble the components to preclude the recurrence of any further squeaks.
Check for worn-out parts: If the aforementioned approaches fail to yield desired results, it is plausible that certain constituents of your skateboard, such as its wheels, have experienced wear and tear, necessitating their replacement, or that the deck has sustained damage, for example, warping.
In such cases, the intervention of a skilled professional skateboarder/mechanic, capable of adeptly diagnosing such malfunctions, may be indispensable to effectuate more substantial repairs.
Enlist professional help: In the event that the aforementioned suggestions prove ineffective, we suggest seeking the assistance of a professional repair shop.
Experienced mechanics are well-equipped to accurately diagnose the source of the noise and provide you with comprehensive guidance on how to permanently address the issue.
This will allow you to resume riding with ease and without the distraction of troublesome squeaks and creaks that occur each time you push off.
Read more How To Move on A Skateboard Without Pushing?
The Consequences of Ignoring a Squeaky Skateboard:
Ignoring a noisy skateboard could have serious implications. The squeak may eventually signify a more serious problem with the board that requires repair. Failure to fix this issue may result in the skateboard breaking or malfunctioning while in use, potentially resulting in injury.
The longer you neglect the problem, the more dangerous it may become and the more costly the repair or replacement may be. To avoid any potential injury, it is preferable to address the issue as soon as feasible.
Why does my skateboard squeak?
There are many things that can make a skateboard squeak, like worn out bearings, loose trucks, or a lack of oil. When the bearings are dirty or worn out, they make a squeaking noise when the wheel rolls.
Can a squeaky skateboard be dangerous to ride?
Yes, a squeaky skateboard can be dangerous to ride because it could mean that the bearings or wheels are broken, which could cause the board to stop working and cause you to fall or get hurt.
How to fix a squeaky skateboard?
To fix a skateboard that makes noise, start by cleaning the bearings and putting skateboard bearing oil on them. Make sure the trucks aren’t loose, which can also cause them to squeak. If the problem keeps happening, you might want to replace the bearings or the whole set of wheels.
How to prevent a skateboard from squeaking?
To stop a skateboard from squeaking, make sure to clean and oil the bearings often. Don’t ride your bike through water or when it’s wet, because this can cause rust and damage the gears. Also, make sure the trucks aren’t loose and look for any other signs of damage or wear on the board.
Whether or not your skateboard making noise is “bad” depends on why it is making squeaky. Is it because you need to tighten the wheels?
If so, you shouldn’t let that go, because loose wheel bearings can cause major problems with performance and safety. On the other hand, if the noise is coming from old bearings that need to be replaced, this isn’t exactly an emergency, but it should still be taken care of soon.
If you don’t know what’s making the board squeak, it’s best to take it to an expert who can figure out what’s wrong and tell you how to fix it.
Duke Edward, a 23-year-old professional skateboarder and content writer, boasts extensive experience in the skateboarding industry. His expertise stems from years of practice and passion for both skateboarding and skiing. As an accomplished athlete, Duke delivers valuable insights and reliable information on skateboarding equipment and techniques.