FAQs

New Skateboard Bearings Are Slow

You may be wondering why your skateboard moves so slowly and seems unable to gain speed. If this explains your typical schedule, I urge you to consider some of the alternatives presented below. The solutions to these minor problems need nothing in the way of time or mental energy.

If you have a question that why my new skateboard wheels are stiff? Here we let you know about all the possible reasons and solutions. One of the major reasons is tight wheels and slow bearings. Bearings with the highest quality polished steel or ceramic balls still have microscopic imperfections on their surfaces. Often people don’t know how to lubricate skateboard bearings?

Related article: How To Make Your Skateboard Wheels Spin Longer?

Here is a short overview of how to lubricate skateboard bearings, A skate-specific bearing lubricant, such as Bones Speed Cream or Bronson Speed Co. Super-Speed Ceramic Oil, is recommended. Spin the bearing while slowly dripping one or two drops of oil into it. The process must be repeated eight times, one for each bearing.

The lubricant is made to seep into the cracks and smooth them out. If you are thinking,why is my skateboard so slow? Hold on a second in, However, lube slows down the bearings during a hand spin, so it’s not altogether good news. It’s not clear why lubrication would cause the bearing to move more slowly.

Since the lube has weight, it must be displaced so that the bearing can continue to spin. Hand spins are difficult because the tiny balls don’t have enough momentum to move the lube out of the way. I hope it will help you to fix slow skateboard bearings. Here are the main reasons why your new skateboard bearings are slow:

  • You should clean your wheels.
  • The axle nut keeps your wheels from turning.
  • Your wheels won’t work on such a surface.
  • You chose the wrong size wheel.
  • You need to get new wheels.
  • Your skateboard isn’t very good.
  • You’re pushing hard, but you don’t have any speed washers.
  • You Make Mongo Go
  • You went in the wrong direction.

Related article: How Long Should Skateboard Wheels Spin

We’re going through all the common issues one by one and looking for solutions that will work. Your skateboard can sometimes be slowed down by just one thing, but it can also be slowed down by a number of things at once.

New Skateboard Bearings are Slow

Wondering why your skateboard seems to move slowly and can’t gain speed? I used to drive myself crazy trying to understand why. When I was younger, I would think of strange ways to fix this problem.

skateboard-bearings

I would spend a lot of time swapping out the bearings and splashing WD40 on the wheel, which would then drip. If this is how you usually do things, you might want to try some of the other ideas here. These are small problems that don’t take much time or thought to fix.

Here is one of the major issues that caused the new skateboard bearings to slow down.

  • There’s too much friction between the wheel and the hub. 
  • Greasy or contaminated bearings.
  • Designation for the wheels.
  • Vehicles that were supposed to transport goods are damaged.
  • Substandard skateboard.
  • Careless squeezing.

When you overtighten the axle nuts, you push against the bearings and prevent the wheels from turning. The resulting squeaky rubbing noise is something we’ve all experienced at some point in our lives.

Verify twice that you have not misplaced any of the constituents. Put one washer on the axle to start. Try using the steering wheel (with bearings inside the wheel). To finish, add the second washer and tighten everything by hand. Use a tool to cinch it down. Check for a clicking sound as you manually spin the wheel from side to side.

If your new skateboard bearings are slow. There are a few telltale signs that indicate it’s time to clean. You might be scratching your head over the sluggishness of brand-new bearings.

There’s no reason why our trip can’t last a few weeks. There is a sudden influx of whirring noises that start out soft and gradually increase in volume. My performance suffered since I never did regular maintenance. Maintaining speed during park transitioning or street skating gets challenging over time.

If you try to spin the wheels by hand and they don’t turn freely or lock up sooner than usual, something is wrong. It’s important to double-check that the bearings are installed properly, as sometimes they’re put in at an angle or aren’t centered. The wheel can be pressed down still on the axle after the nut has been removed.

This makes it possible for bearings to easily snap into position. The nut should be tightened until it is even with the end of the axle. The use of washers and spacers can be extremely important in avoiding wheel lockup and stalling. This will surely help you out to fix slow bearings.

One obvious reason why skateboard bearings are slow and skateboard wheels are stiff is Dirt and dust, it will slow you down, and it can happen depending on where and how often you skate. When this is exposed to dirt and dust, it sticks to the insides. If you skate every day, I would suggest cleaning the skateboard at least once or twice a month to stay safe. 

Usually, my friends ask me how to lubricate skateboard bearings. I suggest them to use WD-40, lubrication spray, or even Vaseline if they don’t have anything else. However, the ideal approach to lube the bearings on your skateboard is using high-quality bearing lubricant. This will aid in keeping your bearings in an excellent state and prolong their lifespan.

Does the Speed of a Skateboard Depend on the Wheels?

Skateboard wheels can be found in a wide variety of sizes, densities, and styles. This is the single most important factor in optimizing your setup for speed and performance, after your weight. According to your skill level and the nature of the terrain, we can recommend a certain set of wheels.

Balancing is difficult to master at first. Although hard wheels are preferred, a great soft 72a (52mm) set can do the trick. Wheels designed for this specific terrain can avoid premature wear and tear without compromising riding comfort.

Flat places may appear for folks who enjoy doing reverts and power slides. Do you ever ponder the cause of the uncomfortable ride? In that scenario, you can either sand them down or invest in a good pair of durable wheels.

In order to get the appropriate turning capabilities, new trucks need to be broken in and adjusted over time. After some experimentation, I found that medium-to-tight trucks perform best, but that transition skating is challenging with tight trucks.

Despite this, I have a strong commitment to skating on flat surfaces like boxes, rails, and curbs because these were the primary challenges I faced as a child.

Popping the board over obstacles is easier with tight trucks than with loose ones.

Wheelbite: 

The frightening wheel bite is the most typical problem skater’s encounter. Wheels biting into the deck’s underside wheel wells can lead you to skid to a halt in tight curves.

Warped Bushings:

Bushings eventually break or split as a result of excessive wear. My suggestion is to find a replacement that is just as sturdy as the original but doesn’t reduce the wheel’s turning radius.

warped-bushings

When I originally started replacing them, I made the error of purchasing “soft” bushings. That I was able to slash through the barrels so easily demonstrates how tightly I’ve been riding. Larger riders benefit greatly from the installation of strong bushings.

Bent Axle Nuts:

Most of the time, you don’t see bent axles and broken hangers, but things happen. Since this is the case, the whole thing needs to be replaced. Get in touch with the maker to find out if there are warranties that last a lifetime.

Missing Speed Rings:

Missing speed rings is also a reason for the usually asked query “my new skateboard wheels are stiff” Speed rings are a standard component of new vehicles. Washers stop bearing guards from damaging axles by rubbing against them. A word of caution to those who need to remove or replace wheels: they may get stuck on the outer rim of the bearings. Don’t drop them or you’ll lose them forever!.

Avoid Cheap Skateboards: 

New skateboarders may not be able to tell the difference in quality between several models. These boards can be spotted at supermarkets and other megastores. Don’t be fooled by claims that a product is “highly recommended” or “a customer favorite” because the presence of negative feedback should serve as a red flag.

How do you fix a slow skateboard bearing?

speed-up-skateboard-bearings

To remove them, use a paper clip to poke at them. Get some acetone, nail polish remover, or rubbing alcohol, and soak your compass and map. Use a spin dryer to remove any remaining moisture and grime. You have successfully cleaned your bearings and emptied the lubrication reservoir.

The use of a silicone-based lubricant is highly recommended. When you use WD40 or a similar product, your bearings will dry out and attract dirt and dust. Bones Speed Cream and Prolong are both available at skate shops and auto parts stores, respectively.

It doesn’t take much, and any excess will be blown away as the wheels spin once you put the shields back on and the bearings back in. Be careful and revel in your swift new abilities on skates.

FAQs: 

Why are my new skateboard bearings slow?

For new bearings to work, the polished and cleaned steel balls/races need to roll against one another and settle lubricant into their surfaces. After a few miles of riding, a bearing’s surface will be thoroughly coated in lubricant. In nearly all cases, this results in a faster hand spin.

Are new skate bearings slow?

New bearings necessitate rolling freshly milled and polished steel balls/races against each other in order to settle lube into their surfaces. After a few miles of riding, a bearing’s surfaces will be thoroughly coated in lubricant. In nearly all cases, this results in a faster hand spin.

How do you break in new bearings?

For accurate bearings, we recommend starting with short intervals and working up to continuous operating. It’s important to remember these two guidelines while you’re first breaking in your precision bearings: Reduce the RPM significantly below what is needed for the initial stage of the application. Hold off on raising the pace until the temperature has stabilized (RPM). 

Do new skateboard bearings need to break in?

It is just as crucial to get the grease in the right spot-on grease-lubricated bearings as it is to get the bearing races properly broken in. When greased properly, it will be between the balls and the track (s).

Don’t be surprised if you see a slight rise in temperature during the break-in operation as a result of the initial grease placement causing excessive friction and resistance. The break-in technique will smooth the raceway and ensure that the grease has settled where it should.

Do bearings need to be broken in?

While some bearings don’t require any “breaking in” at all, others do. We’ve found that an hour on the skates is optimal. It’s not the bearing itself that needs to be broken in, but the lubrication. No breaking in of the bearings is required; if the wheel is too tight, merely loosen it until it can barely swivel.

In grease-lubricated bearings, the grease placement is just as crucial as the bearing races themselves, hence it’s important to go through the break-in procedure. When greased properly, it will be between the balls and the track.

My verdict on The Ultimate Methods to Speed up Your Slow Skateboard is:

When tightening bolts, leave enough room for them to spin freely. If you skate on a daily basis, you should clean your bearings every month or three months. You should stock up on cleaning solutions and skate-rated speed lubrication. Reduced top speed and improved acceleration upon takeoff describe smaller wheel sizes.

Apply all the above-mentioned methods to speed up your slow bearings. Always spare at least 30 mins twice a month to clean your skateboard wheel, bearings, and every element that needs cleansing and maintenance to keep up your gadgets UpToDate and in good shape. This article has surely helped you if you think new skateboard bearings are slow.